BMW ABS/DSC Warning Light Reset via Foxwell NT680 Pro

The BMW 3 series has an ABS and traction warning light on the dashboard, so I’m gonna show how to reset it with the Foxwell NT680 Pro Scan Tool.


Plug connector into OBD2 port, press

Diagnostic >> Europe >> BMW >> Manual selection >> 3 series >> F30/F31/F35

bmw-abs-dsc-warning-light-reset-via-foxwell-nt680-pro-1

bmw-abs-dsc-warning-light-reset-via-foxwell-nt680-pro-2

bmw-abs-dsc-warning-light-reset-via-foxwell-nt680-pro-3

bmw-abs-dsc-warning-light-reset-via-foxwell-nt680-pro-4

Turn off the ignition.

Wait for approx 10s...

Switch on the ignition again.


Diagnosis >> Control modules >> Chassis >> ABS-DSC dynamic stability control >> Read codes


It tells about one fault code:

48082A - Wheel speed sensor: voltage supply, short circuit to B+. rear right.


The information means the rear right ABS sensor or wheel speed sensor is actually faulty, which needs to be replaced.

bmw-abs-dsc-warning-light-reset-via-foxwell-nt680-pro-5

bmw-abs-dsc-warning-light-reset-via-foxwell-nt680-pro-6

bmw-abs-dsc-warning-light-reset-via-foxwell-nt680-pro-7


Having been replaced with a new sensor, let’s go back to 

Clear codes >> Codes cleared, OK


Now you can see, the warning lights on the dashboard have gone!

BMW ABS/DSC warning light reset is successful.

bmw-abs-dsc-warning-light-reset-via-foxwell-nt680-pro-8

bmw-abs-dsc-warning-light-reset-via-foxwell-nt680-pro-9

This is using Foxwell NT680 Pro Scanner to get rid of the warning lights for a BMW. It also supports the most 21 frequently performed services like DPF, EPB, SAS, BRT, gearing learning...etc.

Specific functions supported car list welcome to contact service online.

https://www.foxwellstore.com/


评论

发表评论

此博客中的热门博文

Foxwell NT680 Pro Audi A6 2011 Oil Reset Instruction

图片
This article will do a demonstration on how to use Foxwell NT680 Pro to perform the Oil Reset Function for Audi A6 2011, which is a frequently-met issue that bothers the customers a lot. Before performing the exact operation steps, let’s come and see the oil change and inspection information on my car computer. The car dashboard will pop up a little symbol up here. Every time you turn on or turn off the car, the on-board computer will expect you shouldn’t do. OK, Let’s get started on it. Precise Operation Procedures: First, you gotta to connect this NT680 Pro unit with your vehicle using OBDII cable. The car dashboard may display the message of “Brake pedal must be applied to shift from P”. Actually, it doesn’t matter. But you have to make sure the ignition is turned on before this test. Come to the Main Menu>> Choose “Maintenance” to enter<< Choose “OIL RESET”   Then, it will come to the steps of selecting the car area, model and year stuff. Here, we will choose “Eur...
阅读全文

How to update your Foxwell NT680/NT680 Lite/NT680 Pro

图片
This article explains how to help you update your Foxwell NT680 / NT680 Lite / NT680 Pro . The detailed steps are as follows: Part 1. Download the upgrade tool: FoxAssist Enter the official Foxwell website (foxwelltech.com), then click https://www.foxwelltech.us/ to continue. After entering the page, select "Support" → "Tools", as shown below: Find the following image on the tools page and click "Download". "FoxAssistSetup" downloaded successfully, click the image to load and run it Choose the accept the license agreement, and click next and keep clicking next that's all the software install finishes. Part 2. Register a Foxwell ID Start FoxAssist, click "Register" Follow the instructions to enter the following information, Then click "Free Registration" to complete it. Part 3. Log in and update After successful registration, go back to the main interface, enter the registered email or Foxwell ID and password and click ...
阅读全文